Yin, X., Yang, R., Tan, G. & Fan, S. Terrestrial radiative cooling: using the cold universe as a renewable and sustainable energy source. Science 370, 786–791 (2020).
Quadrennial Technology Review: An Assessment of Energy Technologies and Research Opportunities Ch. 5 (US Department of Energy, 2015); https://www.energy.gov/sites/prod/files/2017/03/f34/qtr-2015-chapter5.pdf
Heating and Cooling (US Department of Energy, accessed 16 April 2021); www.energy.gov/heating-cooling
Li, T. et al. A radiative cooling structural material. Science 364, 760–763 (2019).
Goetzler, W. Energy Savings Potential and RD&D Opportunities for Commercial Building HVAC Systems (US Department of Energy, 2017).
Jelle, B. P. Traditional, state-of-the-art and future thermal building insulation materials and solutions—properties, requirements and possibilities. Energy Build. 43, 2549–2563 (2011).
Pisello, A. L. State of the art on the development of cool coatings for buildings and cities. Sol. Energy 144, 660–680 (2017).
Zhai, Y. et al. Scalable-manufactured randomized glass–polymer hybrid metamaterial for daytime radiative cooling. Science 355, 1062–1066 (2017).
Mandal, J. et al. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling. Science 362, 315–319 (2018).
Chen, Y. et al. Colored and paintable bilayer coatings with high solar-infrared reflectance for efficient cooling. Sci. Adv. 6, eaaz5413 (2020).
Zhou, L. et al. A polydimethylsiloxane-coated metal structure for all-day radiative cooling. Nat. Sustain. 2, 718–724 (2019).
Raman, A. P., Anoma, M. A., Zhu, L., Rephaeli, E. & Fan, S. Passive radiative cooling below ambient air temperature under direct sunlight. Nature 515, 540–544 (2014).
Hernández-Pérez, I. et al. Thermal performance of reflective materials applied to exterior building components—a review. Energy Build. 80, 81–105 (2014).
Li, X. et al. Integration of daytime radiative cooling and solar heating for year-round energy saving in buildings. Nat. Commun. 11, 6101 (2020).
Martilli, A., Clappier, A. & Rotach, M. W. An urban surface exchange parameterisation for mesoscale models. Bound. Layer Meteorol. 104, 261–304 (2002).
Albatici, R., Passerini, F., Tonelli, A. M. & Gialanella, S. Assessment of the thermal emissivity value of building materials using an infrared thermovision technique emissometer. Energy Build. 66, 33–40 (2013).
Avdelidis, N. P. & Moropoulou, A. Emissivity considerations in building thermography. Energy Build. 35, 663–667 (2003).
Aditya, L. et al. A review on insulation materials for energy conservation in buildings. Renew. Sustain. Energy Rev. 73, 1352–1365 (2017).
Jelle, B. P., Kalnæs, S. E. & Gao, T. Low-emissivity materials for building applications: a state-of-the-art review and future research perspectives. Energy Build. 96, 329–356 (2015).
Guo, W., Qiao, X., Huang, Y., Fang, M. & Han, X. Study on energy saving effect of heat-reflective insulation coating on envelopes in the hot summer and cold winter zone. Energy Build. 50, 196–203 (2012).
Juanicó, L. E. Thermal insulation of roofs by using multiple air gaps separated by insulating layers of low infrared emissivity. Constr. Build. Mater. 230, 116931 (2020).
Tenpierik, M. J. & Hasselaar, E. Reflective multi-foil insulations for buildings: a review. Energy Build. 56, 233–243 (2013).
Medina, M. A. A comprehensive review of radiant barrier research including laboratory and field experiments. ASHRAE Trans. 118, 400–407 (2012).
Principi, P. & Fioretti, R. Thermal analysis of the application of PCM and low emissivity coating in hollow bricks. Energy Build. 51, 131–142 (2012).
Fantucci, S. & Serra, V. Experimental assessment of the effects of low-emissivity paints as interior radiation control coatings. Appl. Sci. 10, 842 (2020).
Joudi, A., Svedung, H., Cehlin, M. & Rönnelid, M. Reflective coatings for interior and exterior of buildings and improving thermal performance. Appl. Energy 103, 562–570 (2013).
Fantucci, S. & Serra, V. Low-E paints enhanced building components: performance, limits and research perspectives. Energy Procedia 126, 274–281 (2017).
Shen, H., Tan, H. & Tzempelikos, A. The effect of reflective coatings on building surface temperatures, indoor environment and energy consumption—an experimental study. Energy Build. 43, 573–580 (2011).
Cai, L. et al. Temperature regulation in colored infrared-transparent polyethylene textiles. Joule 3, 1478–1486 (2019).
Peng, Y. & Cui, Y. Advanced textiles for personal thermal management and energy. Joule 4, 724–742 (2020).
Hsu, P.-C. et al. Radiative human body cooling by nanoporous polyethylene textile. Science 353, 1019–1023 (2016).
Peng, Y. et al. Nanoporous polyethylene microfibres for large-scale radiative cooling fabric. Nat. Sustain. 1, 105–112 (2018).
Hsu, P.-C. et al. A dual-mode textile for human body radiative heating and cooling. Sci. Adv. 3, e1700895 (2017).
Reale, A. et al. Spray coating for polymer solar cells: an up-to-date overview. Energy Technol. 3, 385–406 (2015).
Chen, Y. et al. Roll-to-roll production of metal–organic framework coatings for particulate matter removal. Adv. Mater. 29, 4–9 (2017).
Fan, L., Li, W., Jin, W., Orenstein, M. & Fan, S. Maximal nighttime electrical power generation via optimal radiative cooling. Opt. Express 28, 25460–25470 (2020).
Crawley, D. B., Pedersen, C. O., Lawrie, L. K. & Winkelmann, F. C. EnergyPlus: energy simulation program. ASHRAE J. 42, 49–56 (2000).